Ramp Entrance Slab cut must be drawn for every Built Up Vehicular Ramp
Ramp Entrance Slab Cut must be drawn at the entrance to the ramp as defined by the __BN_RampDirection polylines.
If the entrance to the Ramp is outside a building, then __BN_RampEntranceSlabCut polyline must be drafted at appropriate position and orientation inside the Plot.
If the entrance to the Ramp is from a floor immediately above, then __BN_RampEntranceSlabCut polyline must be drafted at appropriate position and orientation inside the __BN_FloorPlan of the floor immediately above the floor that contains the ramp.
.
